satchat

If you cannot find a code for your tv try this. Follow the instruction to tune the remote using the samsung code in the instructions below.

When you get to the tv followed by standby section (step 6) repeat this process until the remote goes through all codes and finds your code and the tv turns off.

For example you should keep pressing TV, STANDBY,TV, STANDBY, TV, STANDBY continued till the TV turns off.

Please note that I have once repeated tv, standby 60 times to get the remote to finally tune to the tv. Once the tv turns off make sure you press the select button to lock the code in and you should hopefully have full functions.

Step 1. Turn your TV on.

Step 2. Press tv on your Sky remote control.

Step 3. Hold down select and the red button together for about two seconds, until the red light on the Sky remote control blinks twice

Step 4. Press tv on your Sky remote control again.

Step 5. Key in the four digit code or 3 digit code for your brand of TV For example 0060(Samsung). The light on the Sky remote control should blink twice if it does not then go back to Step 1 and try another code given. If it does flash twice continue to Step 6.

Step 6. Press tv again then press the standby button. If the remote does not turn off the first time repeat this twice again for example tv, standby, tv, standby.

Step 7. Once the tv turns off press the select button and the remote should blink twice and lock the code in.

You should now Have all functions.

Please let me know if this works.

Satchat